5 Keys Remote RF Touch Panel RGB LED Controller
Working temperature | -20-60 degree |
Supply voltage | DC12V~24V |
0utput | 3 channels |
Connecting mode | common anode |
External dimension | L81×W64×H24mm |
Remote control size | L137×W80×H25mm |
Net weight | 170g |
Gross weight | 180g |
Static power consumption | <1W |
Output current | <6A(each channel) |
Output power | 12V<216W; 24V<432W |
Operation method:
(1) Connect the load wire at first, following by the power wire; Please ensure short circuit can not occur between connecting wire before you turn on the power
(2) Just the ON key is valid in OFF condition, to turn on the controller by press the ON key for the first time.the controller will be in the same mode as last time it save.
(3) In on condition,press the Key 2 can be realize the 15 kinds of changing mode as follows:
NO. | Mode | remark |
---|---|---|
1 | Six color fade | Key 4 and key 5 can be adjust the changing speed of the dynamic mode |
2 | three color jump | |
3 | Seven color fade | |
4 | Three color fade | |
5 | Seven color fade | |
6 | Red strobe-flash | |
7 | blue strobe-flash | |
8 | Purple strobe-flash | |
9 | Green strobe-flash | |
10 | Yellow strobe-flash | |
11 | Cyan strobe-flash | |
12 | White strobe-flash | |
13 | Red-blue cross jump | |
14 | Blue-gree cross jump | |
15 | Red-gree cross jump |
(4) Press Key 3 once to activate white light mode.when switch to the static color,can be touch the color ring to realize the color you want.
(5) In static color mode,can be adjust the light brightness by press Key 4 or key 5.
(6) In dynamic mode, can be press the key 4 or key 5 to adjust the changing speed.